TY - JOUR
T1 - SU‐FF‐T‐407
T2 - Full Monte Carlo Computation of K Correction Factors Calculated in Tomotherapy Static and Helical Deliveries for Future Ion Chamber Reference Dosimetry Protocols of Non Standard Beams
AU - Sterpin, E.
AU - Mackie, T.
AU - Lu, W.
AU - Olivera, G.
AU - Vynckier, S.
PY - 2009
Y1 - 2009
N2 - Purpose: Calculate correction factors for ion chamber dosimetry using Monte Carlo (MC) simulations for future IAEA/AAPM protocols adapted to Tomotherapy treatments. Material and methods: The formalism in Alfonso et al (Med. Phys. 35 2008) introduced two corrections factors: [formula omitted] defined for a “machine‐specific‐reference” field fMSR (10×5 cm2 field, source‐surface distance of 85 cm) and [formula omitted] for a “plan‐class‐specific‐reference” field, fPCSR, closer to actual clinical treatments. Here, fPCSR was a helical sequence delivering a centered cylindrical homogeneous dose over 10 cm in a homogeneous cylindrical phantom. The k factors were calculated using MC with accurate simulation of static and helical deliveries (using TomoPen, based on PENELOPE) and detailed modeling of the geometry of the ion chambers Exradin A1SL, PTW‐30013, Wellhöfer IC‐70 and NE‐2571. Calculations in the phantoms were performed by the “cavity” EGS++ user code, for static beams, and PENELOPE for both helical and static beams. Correction factors were calculated from the formulas [formula omitted] and [formula omitted] where Dm is the dose at the reference point in medium m (water or Solid Water™) and a [formula omitted] is the dose averaged over the air cavity. Results: For the A1SL chamber, [formula omitted] equaled 0.997±0.001 (3σ), which is consistent with the values previously reported using existing protocols. [formula omitted] was estimated at 0.995±0.002 for the procedure chosen. The work is in progress for the ion chambers listed above and other Tomotherapy “PCSR” settings, like a typical bilateral head and neck treatment delivery planned on a phantom. Conclusions: A powerful MC method is proposed here to compute accurate correction factors for Tomotherapy treatments. The data obtained may be of primary importance during the final definition of a new dosimetry protocol, adapted to nonstandard treatments like Tomotherapy and may also improve global treatment accuracy, especially for helical deliveries. Research partially sponsored by Tomotherapy Incorporated.
AB - Purpose: Calculate correction factors for ion chamber dosimetry using Monte Carlo (MC) simulations for future IAEA/AAPM protocols adapted to Tomotherapy treatments. Material and methods: The formalism in Alfonso et al (Med. Phys. 35 2008) introduced two corrections factors: [formula omitted] defined for a “machine‐specific‐reference” field fMSR (10×5 cm2 field, source‐surface distance of 85 cm) and [formula omitted] for a “plan‐class‐specific‐reference” field, fPCSR, closer to actual clinical treatments. Here, fPCSR was a helical sequence delivering a centered cylindrical homogeneous dose over 10 cm in a homogeneous cylindrical phantom. The k factors were calculated using MC with accurate simulation of static and helical deliveries (using TomoPen, based on PENELOPE) and detailed modeling of the geometry of the ion chambers Exradin A1SL, PTW‐30013, Wellhöfer IC‐70 and NE‐2571. Calculations in the phantoms were performed by the “cavity” EGS++ user code, for static beams, and PENELOPE for both helical and static beams. Correction factors were calculated from the formulas [formula omitted] and [formula omitted] where Dm is the dose at the reference point in medium m (water or Solid Water™) and a [formula omitted] is the dose averaged over the air cavity. Results: For the A1SL chamber, [formula omitted] equaled 0.997±0.001 (3σ), which is consistent with the values previously reported using existing protocols. [formula omitted] was estimated at 0.995±0.002 for the procedure chosen. The work is in progress for the ion chambers listed above and other Tomotherapy “PCSR” settings, like a typical bilateral head and neck treatment delivery planned on a phantom. Conclusions: A powerful MC method is proposed here to compute accurate correction factors for Tomotherapy treatments. The data obtained may be of primary importance during the final definition of a new dosimetry protocol, adapted to nonstandard treatments like Tomotherapy and may also improve global treatment accuracy, especially for helical deliveries. Research partially sponsored by Tomotherapy Incorporated.
UR - http://www.scopus.com/inward/record.url?scp=85024801618&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85024801618&partnerID=8YFLogxK
U2 - 10.1118/1.3181889
DO - 10.1118/1.3181889
M3 - Article
AN - SCOPUS:85024801618
SN - 0094-2405
VL - 36
SP - 2615
EP - 2616
JO - Medical Physics
JF - Medical Physics
IS - 6
ER -