Biomechanical Performance of Charcot-Specific Implants

Research output: Contribution to journalArticlepeer-review

4 Scopus citations


Over the past 2 decades, an increased number of diabetic Charcot neuroarthropathy reconstructions have been performed. Despite advances in implant technology, arthrodesis complication rates remain high. This study examined the biomechanical properties (4-point bending, cantilever bending, and thread pullout resistance) of intramedullary implants designed for midfoot reconstruction. Large implants included A1 (7.4 mm cannulated stainless steel beam), B1 (6.5 mm solid titanium bolt), and C1 (7.0 mm cannulated titanium beam). Smaller implants included A2 (5.4 mm cannulated stainless steel beam) and C2 (5.0 mm solid titanium bolt). Four-point bending testing compared flexural properties of the body of the implants. Cantilever-bending testing was performed with the maximum bending moment being applied off the main thread of the implant to assess the thread portion. Thread pullout strength was tested by fixing the implants to a Sawbone block on a platform, and the distal portion of the implant in a clamp connected to loading actuator. Implant A1 demonstrated higher stiffness, force to failure, and fatigue compared to implants B1 and C1 (p < .05). Pullout strength of implant A1 was higher than implant B1 (p < .05). Thread fatigue strength of implant A1 was higher than implant C1 (p < .05). Implant A2 demonstrated higher stiffness, force to failure, tip fatigue strength, and thread pullout strength compared to implant C2 (p < .05), while implant C2 demonstrated higher body fatigue failure than implant A2 (p < .05). Alteration of beam/bolt parameters influences the biomechanical performance of implants used in Charcot reconstruction. Greater stiffness resists deformation, providing improved stability. Greater static failure load and fatigue limit improves the implant's ability to withstand higher and repetitive loads before failing This study should stimulate further clinical research to determine if these biomechanical properties translate into reduced implant failure rates and improved clinical outcomes in patients with diabetic Charcot neuroarthropathy.

Original languageEnglish (US)
Pages (from-to)440-447
Number of pages8
JournalJournal of Foot and Ankle Surgery
Issue number3
StatePublished - May 1 2021


  • 5
  • cantilever
  • fatigue
  • holding
  • implants
  • neuroarthropathy
  • pullout

ASJC Scopus subject areas

  • Surgery
  • Orthopedics and Sports Medicine


Dive into the research topics of 'Biomechanical Performance of Charcot-Specific Implants'. Together they form a unique fingerprint.

Cite this